Micromechanical Influence of Fabric Anisotropy and Stress Path Dependency on Liquefaction Susceptibility in Granular Soils
Open Geomechanics, Volume 6 (2025), article no. 3, 18 p.

This study examines the undrained cyclic behavior of granular assemblies under true triaxial loading, with a particular focus on the micromechanical effects of initial anisotropy and Lode angle. The Discrete Element Method (DEM) is coupled with the Coupled Fluid Method (CFM) to model fluid-solid interactions under undrained conditions. Three transversely isotropic specimens, composed of elongated particles, are generated with bedding plane orientations of 0$^\circ $, 45$^\circ $, and 90$^\circ $ to represent different initial fabric conditions. Simulations are performed under constant mean total stress with a fixed Lode angle. The results reveal that both initial fabric and Lode angle significantly influence liquefaction susceptibility and shear strength. Specifically, increasing the bedding plane angle from 0$^\circ $ to 90$^\circ $ increases the number of loading cycles required to reach liquefaction, primarily due to better alignment between the bedding plane and the major principal stress direction. Furthermore, the Lode angle affects the secant shear modulus and the rate of excess pore pressure generation, underscoring its role in preliquefaction behavior.

Received:
Revised:
Accepted:
Published online:
DOI: 10.5802/ogeo.23
Keywords: DEM, CFM, True triaxial, Lode angle, Fabric anisotropy.
Salimi, Mohammad 1; Irani, Nazanin 1; Tafili, Merita 1; Wichtmann, Torsten 1

1 Chair of Soil Mechanics, Foundation Engineering and Environmental Geotechnics, Ruhr-Universität Bochum, Germany
License: CC-BY-NC-SA 4.0
Copyrights: The authors retain unrestricted copyrights and publishing rights
@article{OGEO_2025__6__A3_0,
     author = {Salimi, Mohammad and Irani, Nazanin and Tafili, Merita and Wichtmann, Torsten},
     title = {Micromechanical {Influence} of {Fabric} {Anisotropy} and {Stress} {Path} {Dependency} on {Liquefaction} {Susceptibility} in {Granular} {Soils}},
     journal = {Open Geomechanics},
     eid = {3},
     pages = {1--18},
     publisher = {Alert Geomaterials},
     volume = {6},
     year = {2025},
     doi = {10.5802/ogeo.23},
     zbl = {arXiv:2309.10860},
     language = {en},
     url = {https://opengeomechanics.centre-mersenne.org/articles/10.5802/ogeo.23/}
}
TY  - JOUR
AU  - Salimi, Mohammad
AU  - Irani, Nazanin
AU  - Tafili, Merita
AU  - Wichtmann, Torsten
TI  - Micromechanical Influence of Fabric Anisotropy and Stress Path Dependency on Liquefaction Susceptibility in Granular Soils
JO  - Open Geomechanics
PY  - 2025
SP  - 1
EP  - 18
VL  - 6
PB  - Alert Geomaterials
UR  - https://opengeomechanics.centre-mersenne.org/articles/10.5802/ogeo.23/
DO  - 10.5802/ogeo.23
LA  - en
ID  - OGEO_2025__6__A3_0
ER  - 
%0 Journal Article
%A Salimi, Mohammad
%A Irani, Nazanin
%A Tafili, Merita
%A Wichtmann, Torsten
%T Micromechanical Influence of Fabric Anisotropy and Stress Path Dependency on Liquefaction Susceptibility in Granular Soils
%J Open Geomechanics
%D 2025
%P 1-18
%V 6
%I Alert Geomaterials
%U https://opengeomechanics.centre-mersenne.org/articles/10.5802/ogeo.23/
%R 10.5802/ogeo.23
%G en
%F OGEO_2025__6__A3_0
Salimi, Mohammad; Irani, Nazanin; Tafili, Merita; Wichtmann, Torsten. Micromechanical Influence of Fabric Anisotropy and Stress Path Dependency on Liquefaction Susceptibility in Granular Soils. Open Geomechanics, Volume 6 (2025), article  no. 3, 18 p. doi : 10.5802/ogeo.23. https://opengeomechanics.centre-mersenne.org/articles/10.5802/ogeo.23/

[1] Ajam Norouzi, Mahsa; Seyedi Hosseininia, Ehsan Effect of initial fabric anisotropy on cyclic liquefaction behavior of granular soils using discrete element method, Granul. Matter, Volume 26 (2024) no. 2, p. 25 | DOI

[2] Basson, Mandeep Singh; Martinez, Alejandro; DeJong, Jason T DEM simulations of the liquefaction resistance and post-liquefaction strain accumulation of coarse-grained soils with varying gradations, Comput. Geotech., Volume 174 (2024) | DOI

[3] Boulanger, Ross W; Seed, Raymond B Liquefaction of sand under bidirectional monotonic and cyclic loading, J. Geotech. Eng., Volume 121 (1995) no. 12, pp. 870-878 | DOI

[4] Caous, Damien; Bois, Christophe; Wahl, Jean-Christophe; Palin-Luc, Thierry; Valette, Julien Analysis of multiaxial cyclic stress state in a wind turbine blade, 20th international conference on composite materials (ICCM20), copenhagen, Denmark (2015)

[5] Christoffersen, Jes; Mehrabadi, Morteza Monte; Nemat-Nasser, Sia A micromechanical description of granular material behavior, J. Appl. Mech., Volume 48 (1981), pp. 339-344 | DOI | Zbl

[6] Drescher, A; De Jong, G De Josselin Photoelastic verification of a mechanical model for the flow of a granular material, Soil Mechanics and Transport in Porous Media: Selected Works of G. de Josselin de Jong, Springer, 2006, pp. 28-43 | DOI

[7] Gu, Xiaoqiang; Huang, Maosong; Qian, Jiangu DEM investigation on the evolution of microstructure in granular soils under shearing, Granul. Matter, Volume 16 (2014) no. 1, pp. 91-106

[8] Gong, Guobin DEM [Discrete Element Method] simulations of drained and undrained behaviour, Ph. D. Thesis, University of Birmingham (2008)

[9] Gao, Ju; Sweetman, Bert; Tang, Shanran Multiaxial fatigue assessment of floating offshore wind turbine blades operating on compliant floating platforms, Ocean Eng., Volume 261 (2022), 111921 | DOI

[10] González Tejada, Ignacio; Antolin, Pablo Use of machine learning for unraveling hidden correlations between particle size distributions and the mechanical behavior of granular materials, Acta Geot., Volume 17 (2022) no. 4, pp. 1443-1461 | DOI

[11] Gong, Guobin; Zha, Xiaoxiong DEM simulation of undrained behaviour with preshearing history for saturated granular media, Model. Simul. Mat. Sci. Eng., Volume 21 (2013) no. 2, 025001 | DOI

[12] Guo, Ning; Zhao, Jidong The signature of shear-induced anisotropy in granular media, Comput. Geotech., Volume 47 (2013), pp. 1-15

[13] Gu, Xiaoqiang; Zhang, Jiachen; Huang, Xin DEM analysis of monotonic and cyclic behaviors of sand based on critical state soil mechanics framework, Comput. Geotech., Volume 128 (2020), 103787

[14] Gao, Zhiwei; Zhao, Jidong; Li, Xiang-Song; Dafalias, Yannis F A critical state sand plasticity model accounting for fabric evolution, Int. J. Numer. Anal. Methods Geomech., Volume 38 (2014) no. 4, pp. 370-390

[15] Hamada, Masanori Large ground deformations and their effects on lifelines: 1964 Niigata earthquake, Case studies liquefaction and lifeline performance during past earthquakes: Japanese case studies, 1992, pp. 1-123

[16] Holtz, Robert D; Kovacs, William D; Sheahan, Thomas C An introduction to geotechnical engineering, 733, Prentice-Hall Englewood Cliffs, 1981

[17] Hakuno, Motohiko; Tarumi, Yuji Sand liquefaction analysis by granular assembly simulation, Proceedings of ninth world conference on earthquake engineering, Volume 8 (1988), pp. 231-236

[18] Ishihara, Kenji; Koga, Yasuyuki Case studies of liquefaction in the 1964 Niigata earthquake, Soils Found., Volume 21 (1981) no. 3, pp. 35-52 | DOI

[19] Irani, Nazanin; Salimi, Mohammad; Golestaneh, Pegah; Tafili, Merita; Wichtmann, Torsten; Lederer, Johannes Deep learning-based analysis of true triaxial DEM simulations: Role of fabric and particle aspect ratio, Comput. Geotech., Volume 173 (2024), 106529 | DOI

[20] Itasca, PFC Version 5.0, Itasca Consulting Group Inc. Minneapolis, United States (2014)

[21] Iai, Susumu; Tobita, Tetsuo; Ozutsumi, Osamu Induced fabric under cyclic and rotational loads in a strain space multiple mechanism model for granular materials, Int. J. Numer. Anal. Methods Geomech., Volume 37 (2013) no. 2, pp. 150-180

[22] Ishihara, Kenji; Yasuda, Susumu Sand liquefaction in hollow cylinder torsion under irregular excitation, Soils Found., Volume 15 (1975) no. 1, pp. 45-59 | DOI

[23] Ju, Shen-Haw; Mao, Yen-Chun Research on offshore wind turbine support structures under seismic soil liquefaction, Ocean Eng., Volume 304 (2024), 117750

[24] Jiang, Mingjing; Zhang, An; Li, Tao Distinct element analysis of the microstructure evolution in granular soils under cyclic loading, Granul. Matter, Volume 21 (2019), pp. 1-16

[25] Khabazian, Masoud; Hosseininia, Ehsan Seyedi Instability of saturated granular materials in biaxial loading with polygonal particles using discrete element Method (DEM), Powder Technol., Volume 363 (2020), pp. 428-441 | DOI

[26] Koseki, Junichi; Matsuo, Osamu; Ninomiya, Yoshio; Yoshida, Tadashi Uplift of sewer manholes during the 1993 Kushiro-Oki earthquake, Soils Found., Volume 37 (1997) no. 1, pp. 109-121 | DOI

[27] Knittel, Lukas; Tafili, Merita; Tavera, CE Grandas; Triantafyllidis, Th New perspectives on preshearing history in granular soils, Sci. Rep., Volume 13 (2023) no. 1, p. 4576 | DOI

[28] Li, Xiang Song; Dafalias, Yannis F Anisotropic critical state theory: role of fabric, J. Eng. Mech., Volume 138 (2012) no. 3, pp. 263-275

[29] Liu, Xiaolei; Jia, Yonggang; Zheng, Jiewen; Shan, Hongxian; Li, Honglei Field and laboratory resistivity monitoring of sediment consolidation in China’s Yellow River estuary, Eng. Geol., Volume 164 (2013), pp. 77-85

[30] Lashkari, Ali; Khodadadi, Mitra; Binesh, Seyed Mohammad; Rahman, Md Mizanur Instability of particulate assemblies under constant shear drained stress path: DEM approach, Int. J. Geomech., Volume 19 (2019) no. 6, 04019049 | DOI

[31] Lin, Ging-Long; Lu, Lyan-Ywan; Lei, Kai-Ting; Liu, Kuang-Yen; Ko, Yung-Yen; Ju, Shen-Haw Experimental study on seismic vibration control of an offshore wind turbine with TMD considering soil liquefaction effect, Mar. Struct., Volume 77 (2021), 102961

[32] Liu, Andrea J; Nagel, Sidney R The jamming transition and the marginally jammed solid, Ann. Rev. Cond. Matter Phys., Volume 1 (2010) no. 1, pp. 347-369

[33] Liu, Guang; Rong, Guan; Peng, Jun; Zhou, Chuangbing Numerical simulation on undrained triaxial behavior of saturated soil by a fluid coupled-DEM model, Eng. Geol., Volume 193 (2015), pp. 256-266

[34] Li, Xia; Yu, Hai-Sui Influence of loading direction on the behavior of anisotropic granular materials, Int. J. Eng. Sci., Volume 47 (2009) no. 11-12, pp. 1284-1296

[35] Lü, XL; Zeng, S; Qian, JG; Huang, MS DEM analysis of the shear strength of cross-anisotropic sand with non-spherical particles, Géotechnique Letters, Volume 7 (2017) no. 3, pp. 230-236

[36] Martin, Eduardo L; Thornton, Colin; Utili, Stefano Micromechanical investigation of liquefaction of granular media by cyclic 3D DEM tests, Géotechnique, Volume 70 (2020) no. 10, pp. 906-915 | DOI

[37] Mo, Weibin; Wang, Rui; Zhang, Jian-Min; Dafalias, Yannis F Quantification of fabric evolution in granular material under cyclic loading, Int. J. Numer. Anal. Methods Geomech., Volume 48 (2024) no. 3, pp. 701-726

[38] Norouzi, Narges; Lashkari, Ali An anisotropic critical state plasticity model with stress ratio-dependent fabric tensor, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Volume 45 (2021), pp. 2577-2594 | DOI

[39] Ni, Xueqian; Ma, Junnan; Zhang, Feng Mechanism of the variation in axial strain of sand subjected to undrained cyclic triaxial loading explained by DEM with non-spherical particles, Comput. Geotech., Volume 165 (2024), 105846

[40] Nguyen, Hoang Bao Khoi; Rahman, Md Mizanur; Fourie, Andy B How particle shape affects the critical state, triggering of instability and dilatancy of granular materials–results from a DEM study, Géotechnique, Volume 71 (2021) no. 9, pp. 749-764 | DOI

[41] Oda, Masanobu The mechanism of fabric changes during compressional deformation of sand, Soils Found., Volume 12 (1972) no. 2, pp. 1-18

[42] O’Hern, Corey S; Langer, Stephen A; Liu, Andrea J; Nagel, Sidney R Random packings of frictionless particles, Phys. Rev. Lett., Volume 88 (2002) no. 7, 075507

[43] Okada, Yasuhiko; Ochiai, Hirotaka Coupling pore-water pressure with distinct element method and steady state strengths in numerical triaxial compression tests under undrained conditions, Landslides, Volume 4 (2007) no. 4, pp. 357-369 | DOI

[44] Petalas, Alexandros L; Dafalias, Yannis F; Papadimitriou, Achilleas G SANISAND-F: Sand constitutive model with evolving fabric anisotropy, Int. J. Solids Struct., Volume 188 (2020), pp. 12-31 | DOI

[45] Pires-Sturm, Alexander P; DeJong, Jason T Influence of Particle Size and Gradation on Liquefaction Potential and Dynamic Response, J. Geot. Geoenv. Eng., Volume 148 (2022) no. 6, 04022045 | DOI

[46] Rodriguez-Arriaga, E; Green, RA Assessment of the cyclic strain approach for evaluating liquefaction triggering, Soil Dyn. Earthq. Eng., Volume 113 (2018), pp. 202-214 | DOI

[47] Radjai, Farhang; Dubois, Frédéric Discrete-element modeling of granular materials, Wiley-Iste, 2011

[48] Rondón, HA; Wichtmann, Torsten; Triantafyllidis, Th; Lizcano, A Comparison of cyclic triaxial behavior of unbound granular material under constant and variable confining pressure, J. Transp. Eng., Volume 135 (2009) no. 7, pp. 467-478 | DOI

[49] Salimi, M; Irani, N; Tafili, M; Wichtmann, T The Effect of Lode Angle and Particle Aspect Ratio on Fabric Evolution in Granular Assemblies: A DEM-CFM Approach, IOP Conference Series: Earth and Environmental Science, Volume 1480, IOP Publishing (2025) no. 1, 012045

[50] Salimi, Mohammad; Irani, Nazanin; Wichtmann, Torsten DEM-CFM analysis of Lode angle influence on the undrained cyclic behavior of anisotropically consolidated soils, Sci. Rep., Volume 15 (2025) no. 1, pp. 1-18

[51] Salimi, MJ; Lashkari, A Undrained true triaxial response of initially anisotropic particulate assemblies using CFM-DEM, Comput. Geotech., Volume 124 (2020), 103509 | DOI

[52] Salimi, M; Lashkari, A; Tafili, M DEM investigation on flow instability of particulate assemblies under coupling between volumetric and axial strains, Acta Geot. (2024), pp. 1-26

[53] Salimi, M; Tafili, M; Irani, N; Wichtmann, T Micro-mechanical response of transversely isotropic samples under cyclic loading, 10th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2023) (2023), pp. 1-6

[54] Salimi, Mohammadjavad; Tafili, Merita; Irani, Nazanin; Wichtmann, Torsten Micro-mechanical response of transversely isotropic samples under cyclic loading, 10th European Conference on Numerical Methods in Geotechnical Engineering, 2023 | DOI

[55] Salimi, M; Tafili, M; Irani, N; Wichtmann, T Exploring Undrained Cyclic True Triaxial Behavior of Granular Assemblies Using DEM, IOP Conference Series: Earth and Environmental Science, Volume 1480, IOP Publishing (2025) no. 1, 012046

[56] Salimi, Mohammad; Tafili, Merita; Prada-Sarmiento, Luis Felipe; Irani, Nazanin; Triantafyllidis, Theodoros; Wichtmann, Torsten DEM-CFM Analysis of Undrained Cyclic Behavior in Transversely Isotropic Granular Soils under True Triaxial Loading Paths, J. Geot. Geoenv. Eng., Volume 151 (2025) no. 5, 04025022 | DOI

[57] Tokimatsu, Kohji; Tamura, Shuji; Suzuki, Hiroko; Katsumata, Kota Building damage associated with geotechnical problems in the 2011 Tohoku Pacific Earthquake, Soils Found., Volume 52 (2012) no. 5, pp. 956-974 | DOI

[58] van Hecke, Martin Jamming of soft particles: geometry, mechanics, scaling and isostaticity, J. Phys. Cond. Matt., Volume 22 (2009) no. 3, 033101 | DOI

[59] Wiebicke, Max; Andò, Edward; Viggiani, Gioacchino; Herle, Ivo Measuring the evolution of contact fabric in shear bands with X-ray tomography, Acta Geot., Volume 15 (2020) no. 1, pp. 79-93 | DOI

[60] Wei, Jiangtao; Huang, Duruo; Wang, Gang Fabric evolution of granular soils under multidirectional cyclic loading, Acta Geot., Volume 15 (2020), pp. 2529-2543

[61] Wu, Qixin; Huang, Lei; Zhao, Futang; Qiu, Zhijian; Zheng, Yewei Liquefaction behavior of inherently anisotropic sand under cyclic simple shear: Insights from three-dimensional DEM simulations, Soil Dyn. Earthq. Eng., Volume 171 (2023), 107947

[62] Wichtmann, T; Niemunis, A; Triantafyllidis, Th Strain accumulation in sand due to cyclic loading: drained cyclic tests with triaxial extension, Soil Dyn. Earthq. Eng., Volume 27 (2007) no. 1, pp. 42-48 | DOI

[63] Wichtmann, T; Niemunis, A; Triantafyllidis, Th Strain accumulation in sand due to drained cyclic loading: on the effect of monotonic and cyclic preloading (Miner’s rule), Soil Dyn. Earthq. Eng., Volume 30 (2010) no. 8, pp. 736-745 | DOI

[64] Wichtmann, Torsten; Triantafyllidis, Theodoros An experimental database for the development, calibration and verification of constitutive models for sand with focus to cyclic loading: part I—tests with monotonic loading and stress cycles, Acta Geot., Volume 11 (2016) no. 4, pp. 739-761 | DOI

[65] Wu, Qixin; Yang, Zhongxuan Unified discrete-element approach applying arbitrary undrained loading paths in element testing for granular soils, Int. J. Numer. Anal. Methods Geomech., Volume 47 (2023) no. 1, pp. 3-22

[66] Wang, Xuefei; Zeng, Xiangwu; Li, Xinyao; Li, Jiale Liquefaction characteristics of offshore wind turbine with hybrid monopile foundation via centrifuge modelling, Renewable Energy, Volume 145 (2020), pp. 2358-2372 | DOI

[67] Yang, Ming; Taiebat, Mahdi Exploring the role of fabric anisotropy in cyclic liquefaction resistance under non-hydrostatic consolidation: Insights from DEM analysis, E3S Web of Conferences, Volume 544, EDP Sciences (2024), 10011 | DOI

[68] Yang, Ming; Taiebat, Mahdi; Mutabaruka, Patrick; Radjai, Farhang Evolution of granular materials under isochoric cyclic simple shearing, Phys. Rev. E, Volume 103 (2021) no. 3, 032904 | DOI

[69] Yuan, Ye; VanderWerf, Kyle; Shattuck, Mark D; O’Hern, Corey S Jammed packings of 3D superellipsoids with tunable packing fraction, coordination number, and ordering, Soft Matter, Volume 15 (2019) no. 47, pp. 9751-9761 | DOI

[70] Yang, ZX; Wu, Y Critical state for anisotropic granular materials: a discrete element perspective, Int. J. Geomech., Volume 17 (2017) no. 2, 04016054 | DOI

[71] Zhu, Minyi; Gong, Guobin; Xia, Jun; Liu, Lianfeng; Wilkinson, Stephen Effects of deviator strain histories on liquefaction of loose sand using DEM, Comput. Geotech., Volume 136 (2021), 104213

[72] Zhang, An; Jiang, Mingjing; Wang, Dong Effect of fabric anisotropy on the cyclic liquefaction of sands: Insight from DEM simulations, Comput. Geotech., Volume 155 (2023), 105188 | DOI

[73] Zhao, Chao-Fa; Pinzón, Gustavo; Wiebicke, Max; Andò, Edward; Kruyt, Niels P; Viggiani, Gioacchino Evolution of fabric anisotropy of granular soils: X-ray tomography measurements and theoretical modelling, Comput. Geotech., Volume 133 (2021), 104046 | DOI

[74] Zhao, Jiajin; Zhu, Zhehao; Zhang, Dexuan; Wang, Hao; Li, Xi Assessment of fabric characteristics with the development of sand liquefaction in cyclic triaxial tests: A DEM study, Soil Dyn. Earthq. Eng., Volume 176 (2024), 108343 | DOI

Cited by Sources: